cart(0)cart
       
Your Position: Home > DOCUMENTS & REFERENCE > MSDS > (3,5-dichlorophenyl)acetonitrile

(3,5-dichlorophenyl)acetonitrile

 

Material Safety Data Sheet

(3,5-dichlorophenyl)acetonitrile  

Section 1 - Chemical Product and Company Identification 

MSDS Name: (3,5-dichlorophenyl)acetonitrile 

Catalog Numbers: SC-12840

 

Section 2 - Composition, Information on Ingredients  

CAS#52516-37-7

Chemical Name (3,5-dichlorophenyl)acetonitrile

 Percent  95%min

EINECS/ELINCS 

Hazard Symbols: Xi

Risk Phrases: 20/21/22-36/37/38. 

 

Section 3 - Hazards Identification  

EMERGENCY OVERVIEW

Harmful if swallowed. Cause  irritating to eyes, respiratory system and skin. 

 

Potential Health Effects 

Eye: Cause eye irritation. 

Skin: Cause skin irritation. May be harmful if absorbed through the skin. May cause sensitization by skin contact. 

Ingestion: Harmful if swallowed. May cause irritation of the digestive tract.

Inhalation: May cause respiratory tract irritation. Harmful if inhaled. 

Chronic:  

 

Section 4 - First Aid Measures  

General adviceConsult a physician. Show this safety data sheet to the doctor in attendance.

If inhaledIf breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.

In case of skin contactWash off with soap and plenty of water. Consult a physician.

In case of eye contactRinse thoroughly with plenty of water for at least 15 minutes and consult a physician.

If swallowedNever give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

 

Section 5 - Fire Fighting Measures  

General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.

Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Special hazards arising from the substance or mixtureHydrogen chloride gasCarbon oxides, nitrogen oxides (NOx), Hydrogen chloride gas

Precautions for fire-fightersWear self contained breathing apparatus for fire fighting if necessary.

 

Section 6 - Accidental Release Measures  

6.1 Personal precautions, protective equipment and emergency procedures

Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.

6.2 Environmental precautionsDo not let product enter drains.

6.3 Methods and materials for containment and cleaning upPick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal.

6.4 Reference to other sectionsFor disposal see section 13.

 

Section 7 - Handling and Storage  

Handling: Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire protection. 

Storage: Store in cool place. Keep container tightly closed in a dry and well-ventilated place. 

 

Section 8 - Exposure Controls, Personal Protection  

Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. 

 

Personal Protective Equipment 

Eyes: Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). 

Skin: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of Fluka - 35530 Page 4 of 7 contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.

Body ProtectionComplete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.

Respirators: For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

 

Section 9 - Physical and Chemical Properties  

Physical State: Powder

Color: Yellow

Odor: Not available. 

pH: Not available. 

Vapor Pressure:0.003mmHg at 25°C

Viscosity: Not available. 

Boiling Point: 287°C
Freezing/Melting Point:Not available. 
Autoignition Temperature: Not available

Flash Point: 124°C

Decomposition Temperature:Not available. 

Solubility: not available 

Specific Gravity/Density: 1.333g/cm3

Molecular Formula:C8H5Cl2N

Molecular Weight:186.038

 

Section 10 - Stability and Reactivity  

Chemical Stability: Stable under normal temperatures and pressures. 

Conditions to Avoid: Incompatible materials. 

Incompatibilities with Other Materials: Strong oxidizing agents. 

Hazardous Decomposition Products: Nitrogen oxides, carbon monoxide, carbon dioxide. 

Hazardous Polymerization: Has not been reported. 

 

Section 11 - Toxicological Information  

RTECS#:      

CAS# 52516-37-7: 

LD50/LC50: RTECS:
CAS# 52516-37-7: 
Carcinogenicity:

No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
Epidemiology: No information found 

Other Studies: The toxicological properties have not been fully investigated. See actual entry in RTECS for complete information. 

 

Section 12 - Ecological Information  

a health hazard

 

Section 13 - Disposal Considerations  

Dispose of in a manner consistent with federal, state, and local regulations.

 

Section 14 - Transport Information  

Shipping Name: not regular

 

Section 15 - Regulatory Information  

European Labeling in Accordance with EC Directives

      Hazard Class: Xi

      Risk Phrases:

             R20/21/22 Harmful by inhalation, in contact with skin and if swallowed.

             R36/37/38 Irritating to eyes, respiratory system and skin.

        Safety Phrases:

             S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

             S37/39 Wear suitable gloves and eye/face protection.

 

Section 16 - Additional Information 

While the information herein is believed to be reliable, it is furnished without warranty of any kind. It shall be used only as a guide. We assume no liabilities from the use of this product or information contained herein.